VEVOR Klasse 3 Anhängerkupplung Anhängerkupplung 2" Empfänger für 20-23 Toyota Highlander

Fit good except passengers side on frame no bolt hole so drilled frame and tapped to fasten left side bracket

As others have written, this is a very beefy trailer hitch. We'll see how it holds up but the powder coating looks like a step up from the thin coat of paint some of the bigger brands come with. As others have also written, the instructions are nearly useless and you're left with the process of elimination when it comes to which bolts go where. It takes a period of time staring at the mounting holes under the vehicle and on the new hitch, and then the number of each type of bolts they give you. There are some conflicting reviews on whether this fits a 2024 Rav4, but it does. All these hitches bolt up to the outboard vertical face of the two square frame tubes under the back of the Rav4. If you do what I did and first bolt up the side brackets (the \"Trestles\" in the instructions) to these frame tubes and snug the bolts up too much, you'll be convinced that it doesn't fit when you go to mount the horizontal hitch \"Bar body\" and it looks like it's too long by about 3/4\" to 1\". Leave the bolts very loose on the \"trestle\" brackets, then swing them outwards and bolt up the horizontal bar body between the brackets before snugging up those bolts on the vertical trestle brackets. It makes perfect sense that it fits the 2024 because other hitch manufacturers list their model as fitting 2023 and 2024, which means that the frame tube fit-ups on the 2023 and 2024 models are identical. This is decent quality hitch and far less expensive than the alternatives. With better instructions I'd probably give it 5 stars.

it was nice to install without having to hold the weight of the entire hitch. I just installed each side then attached the center piece and tightened all the bolts. So far so good, I like the little bolt under the receiver that you can tighten to prevent your hitch from rattling.

Die Ware ist einfach Spitze.Am besten ist das ich Versehentlich das Produkt 2mai geordert hatte.Es machte mir Große Sorgen wie ich Die Schwere Kupplung inRetour bringen sollte.Ich bin im Rolli da ist das schon ein Problem.Der Servise von UPS war einfach Klasse.Sehr Freundlich und die Retour war für mich Erledigt.Danke,Danke das war Klasse

Good price, right fit.

It fit my highlander was easy to install works great

You can install it by yourself, but I highly recommend an extra set of hands. If I were to do it again, I'd get a couple of 10 M thread 3/4\" long stainless steel bolts for the passenger side. The bolts supplied are difficult to start threading because of their length and room available to work.

Here are some things about the instructions: first, they swap left and right. Or at least they refer to the US driver's side as right and the passenger's side as left. Second, they get the order wrong for assembling a bolt. Please put the spring washer between the head of the bolt and the gasket. Third, they refer to the bolts that go into the beam as having nuts. They don't, the car has the threaded sockets. You can, with two people, assemble the unit and lift it into place, but it's pretty heavy for one. However, one person can install in three pieces. If you put up the sides first, then the bar, you need to leave everything very loose or you won't get the bar between the sides. Then, when assembled, you can tighten everything up. You need 18mm sockets and wrenches for most of the bolts and a 16mm socket for the pad nut bolt. The passenger side has a tow chain hook that you will remove. Those bolts are the existing bolts the instructions refer to. The instructions didn't tell what the pad nut is for and I saw one review that suggested the person didn't install it (scary). The driver's side lacks a threaded socket for a vertical bolt, while the passenger side has two. The pad nut fits into a hole in the beam and allows the bolt to attach. That bolt is smaller (M10) than the others (M12). It would be nice if the instructions included torque recommendations for each bolt. A little Loctite might not be a bad idea if you're unsure. In all, I'm pretty happy with the hitch. I like doing jobs myself and I was able to do this one pretty easily. I'm no pro but hopefully this helps you install it and maybe vevor will have someone write instructions that make sense.

This hitch exceeded my expectations for fit especially. It really did fit into place very nicely and doesn't look clumsy like some aftermarket hitches. The hangers that mount to the vehicle frame are 5/16\" steel. Very rugged, and everything was painted and packaged well. The fitment for 2023 and 2024 RAV4 (and beyond?) is a little different than the instructions, so I ended up with a couple extra bolts that weren't needed. Installation was pretty easy, but you'll want the vehicle up on ramps, jackstands, or a lift. I sorted out the nuts and bolts before starting, then loosely mounted the 2 hangers to the vehicle frame, then set the bar containing the receiver hitch on a 5 gallon bucket to hold it up while I started the screws holding it to the hangers. I torqued the hanger bolts to the vehicle at 85 ft lbs, and the short bolts that mount the receiver bar to the hangers at 30 ft lbs. This is an excellent hitch for a newer RAV4.

Great price.. Easy install.. Fit perfectly..Solid hitch.. Very happy.. Exactly right for my usage.